MAX7219CNG IC Serially Interfaced 8-Digit LED Display Driver
MODERN HALLROAD
The MAX7219CNG IC is a newer version of the MAX7219 that is pin-compatible and has the same features, but it is also RoHS compliant and has a lower power consumption. The MAX7219CNG is a serial input/output common cathode display driver that interfaces microprocessors (µPs) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs.
₨ 200.00
The MAX7219CNG IC is a newer version of the MAX7219 that is pin-compatible and has the same features, but it is also RoHS compliant and has a lower power consumption. The MAX7219CNG is a serial input/output common cathode display driver that interfaces microprocessors (µPs) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs.
MAX7219 LED Display IC is a versatile chip that can use in a wide variety of applications. The MAX7219 is a common-cathode display driver IC with serial inputs and output pins. It can use to drive 7-segment numeric LED displays, bar-graph displays, or 64 individual LEDs.
Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and an 8X8 static RAM that stores each digit. Only one external resistor is required to set the segment current for all LEDs.
The MAX7219 Driver IC is compatible with SPI™, QSPI™, and MICROWIRE™, and has slew-rate-limited segment drivers to reduce EMI. A convenient 4-wire serial interface connects to all common μPs. Individual digits may be addressed and updated without rewriting the entire display.
This MAX7219 8X8 LED Matrix IC also allow the user to select code-B decoding or no-decode for each digit. The devices include a 150μA low-power shutdown mode, analog and digital brightness control, a scan-limit register that allows the user to display from 1 to 8 digits, and a test mode that forces all LEDs on.
The MAX7219 Driver IC can operate with an input voltage of 2.7V to 5.5V. The recommended operating voltage is 5V. The maximum supply voltage is 5.5V. If the input voltage is outside of the specified range, the MAX7219 may not operate properly or may damage.
Features : –
The MAX7219 Display Driver IC has a built-in regulator that converts the input voltage to a regulated 5V supply for the internal circuitry. This means that the input voltage can be as low as 2.7V without affecting the operation of the MAX7219. The MAX7219 IC is a versatile and easy-to-use LED display driver that has a number of benefits, including:
- Simple to use: The MAX7219 8X8 LED Matrix IC can easily controlled using a 4-wire serial interface. This makes it easy to interface the MAX7219 with a microcontroller or other digital device.
- Flexible: The MAX7219 8X8 LED Matrix IC can use to drive a variety of LED displays, including 7-segment numeric displays, bar-graph displays, or 64 individual LEDs.
- Low power consumption: The MAX7219 8X8 LED Matrix IC has a low power consumption, which makes it ideal for battery-powered applications
- RoHS compliant: The MAX7219 8X8 LED Matrix IC is RoHS compliant, which means that it does not contain any lead or other harmful materials.
Here are some of the specific benefits of the MAX7219 IC:
- Built-in BCD decoder: The MAX7219 LED Display Driver IC has a built-in BCD decoder, so you don’t need to worry about generating the BCD codes yourself.
- 8×8 static RAM: The MAX7219 LED Display Driver IC has an 8×8 static RAM, so you can store up to 8 digits of data in the chip.
- Serial interface: The MAX7219 LED Display Driver IC has a serial interface that only requires 4 pins, so it’s easy to connect to a microcontroller.
- Low-power shutdown mode: The MAX7219 LED Display Driver IC has a low-power shutdown mode, so you can save power when the display is not in use.
MAX7219CNG IC Specifications : –
The MAX7219 LED Display Driver IC is a versatile and powerful tool that can use in a variety of applications. If you are looking for an easy-to-use and low-power LED display driver, the MAX7219 IC is a good option. The MAX7219 IC has the following specifications:
- Operating voltage range: +2.7 to +5.5V
- Recommended operating voltage: +5V
- Maximum supply voltage: 6V
- Data-to-Segment Delay Time: 2.2mSec
- Maximum current allowed to draw through each segment pin: 100mA
- Maximum current allowed to through each DIGIT ground pin: 500mA
- Low power consumption
- Operating temperature: 0°C to +70°C
- Storage Temperature: -65°C to +150°C
MAX7219CNG IC Applications : –
The MAX7219 8 BIT 7 SEGMENT Display IC is a good choice for a variety of applications because it is easy to use, has a low power consumption, and can use to drive a variety of LED displays. The MAX7219 IC is a versatile and easy-to-use LED display driver that can use in a variety of applications, including:
- Digital clocks: The MAX7219 IC can use to drive 7-segment numeric displays to show the time.
- Counters: The MAX7219 IC can use to count up or down by displaying the count on a 7-segment numeric display.
- Bar graphs: The MAX7219 IC can use to display bar graphs by lighting up different segments of a 7-segment numeric display.
- LED matrices: The MAX7219 IC can use to drive LED matrices by lighting up individual LEDs.
- Scoreboards: The MAX7219 IC can use to display scores on a scoreboard by lighting up different segments of a 7-segment numeric display.
- Traffic lights: The MAX7219 IC can use to control traffic lights by lighting up different segments of a 7-segment numeric display.
- Displaying text: The MAX7219 IC can use to display text by storing the characters in the chip’s RAM.
- Creating animations: The MAX7219 IC can use to create animations by changing the display data on a regular basis.
- Controlling other devices: The MAX7219 IC can use to control other devices by sending commands through the serial interface.
MAX7219CNG IC Pin Descriptions : –
The MAX7219CNG has 8 pins, as follows:
- VCC: This pin is the positive supply voltage. It should connect to a 2.7V to 5.5V power supply.
- GND: This pin is the ground voltage. It should connect to the circuit’s ground.
- DIN: This pin is the serial data input pin. Data is transferred to the MAX7219CNG serially, one bit at a time.
- CS: This pin is the chip select pin. It is use to select the MAX7219CNG from other devices on the same bus.
- CLK: This pin is the clock pin. It is use to clock in the serial data to the MAX7219CNG.
- LOAD: This pin is the load pin. It is use to load the data into the MAX7219CNG’s registers.
- A/B: This pin is the address/brightness pin. It is use to select the digit or segment to be displayed.
- SEG: This pin is the segment output pin. It is connect to the LED display.
Package : –
1x MAX7219CNG IC
More Products at majju.pk
- 5V 1 Channel Relay Module Low Level Trigger
- 2 Relay Module 5v Dual Channel Relay Board with Optocoupler
- Arduino Mega 2560 R3 with Cable in Pakistan
- Ultrasonic Distance Sensor Module HC-SR04 for Arduino
- HW-316 4 Channel 5v Relay Module With Optocoupler
- Arduino Pro Mini 3.3v/8mhz Atmega328P Microcontroller Board
User Reviews
Be the first to review “MAX7219CNG IC Serially Interfaced 8-Digit LED Display Driver”
You must be logged in to post a review.
Vendor Information
- Store Name: MODERN HALLROAD
- Vendor: MODERN HALLROAD
- Address:
- 5.00 rating from 1 review
Fingerprint Scanner GT-511C3 Biometric Sensor Module
You may also like…
₨ 200.00
There are no reviews yet.